20V Radio Control Bundle

SKU:
$349.99
This is NOT competition Legal in the FIRST® Tech Challenge.

SHIPPING NOTICE: With this product in your cart, your order can only ship via ground and only to addresses in the continental US.

Featuring a house-curated selection of electronics, the 20V Radio Control Bundle gives you everything you need to get your chassis up and running with heavy-duty 20V action!

Element-6 Transmitter & Receiver

The tried-and-true Element-6 Radio Control System allows you to send wireless signals to the motor controller to proportionally control the speed and direction of up to four connected motors.

20V Li-ion Battery and Smart Dock

The 20V 6Ah Li-ion battery supplies power to the motor controller via the goBILDA® Smart Dock. When the battery runs low, just plug it into the included charger (with built-in overcharge and short-circuit protection!).

2x40A Motor Controller

The 2x40A Motor Controller facilitates the proportional speed and directional control of up to four brushed DC motors (two motors per channel) that have 3.5mm bullet connectors. It also sends 6.2V to the receiver via its built-in BEC. 

Wiring

No soldering required—this bundle is plug-and-play! All the wiring you need to get your chassis up and running is included in the bundle.

Hardware

We've included hardware of the perfect lengths to fasten the Smart Dock, motor controller, and receiver to goBILDA® channel.

Compatibility

This bundle is designed to control a chassis with two or four bidirectional brushed DC motors driving in a skid-steer (four-wheel drive) or differential steer (two-wheel drive) configuration.

The heavy-duty, 20V-compatible goBILDA® Saturn Planetary Gear Motors are a perfect match for this bundle (see the Related Products section below). To use this bundle with motors that don't have 3.5mm bullet connectors, you can purchase 3.5mm bullet leads (3800-0012-0300) and solder them to your motors.

The receiver, motor controller, and Smart Dock each have holes on the goBILDA® 32mm pattern. That’s why it’s easy to bolt them to your build, especially if your project makes use of the extensive goBILDA® system!

⚠️Li-ion Battery Safety Notice:Lithium ion batteries can be dangerous. Please read these safety instructions as well as our warranty and return policy for Li-ion batteries.

Bundle Contents:

QTYSKUName
8 individual screws 2800-0004-0012 2800 Series Zinc-Plated Steel Socket Head Screw (M4 x 0.7mm, 12mm Length)
8 individual screws 2800-0004-0016 2800 Series Zinc-Plated Steel Socket Head Screw (M4 x 0.7mm, 16mm Length)
12 individual locknuts 2812-0004-0007 2812 Series Zinc-Plated Steel Nylon-Insert Locknut (M4 x 0.7mm, 7mm Hex)
100 pack 2909-0101-0100 Zip Tie (100mm Length, Black)
1 3101-1020-0001 20V Li-ion Battery Charger (DEWALT® 20V Compatible)
1 3104-0020-0001 goBILDA® Smart Dock for 20V Battery (DEWALT® 20V Compatible)
1 3105-0201-0040 2x40A Motor Controller (Includes 2 TJC8 Cables)
1 3113-2006-0001 Element-6 Radio Control System Mode 2 (Includes Receiver)
1 3100-1020-0001 20V, 6Ah Li-ion Battery
1 3802-4041-0300 XT90 Extension (FH-MC to MH-FC, 300mm Length)
4 individual batteries 3120-0150-0105 AA Alkaline Battery

This website uses cookies to ensure you get the best experience on our website