Discontinued Products
To keep things clean and relevant, we sometimes have to discontinue a product. If you are looking for a SKU that we no longer carry this table may help you find a suitable replacement, or at least confirm its status.
| SKU | Name | Replaced By |
|---|---|---|
| 2910-0818-0008 |
2910 Series Aluminum Clamping Collar (8mm ID x 18mm OD, 8mm Length) |
2910-0921-0008 |
| 3414-1006-0016 |
3414 Series 5mm HTD Pitch Set Screw Pinion Timing Belt Pulley (6mm D-Bore, 16 Tooth) |
3417-1006-0016 |
| 1119-0009-0072 |
1119 Series Shaft Beam (9 Hole, 72mm Length) |
1106-0009-0072 |
| 1119-0005-0040 |
1119 Series Shaft Beam (5 Hole, 40mm Length) |
1106-0005-0040 |
| 1119-0002-0016 |
1119 Series Shaft Beam (2 Hole, 16mm Length) |
1106-0002-0016 |
| 4004-1006-1006 |
4004 Series Heavy Duty Clamping Shaft Coupler (6mm D-Bore to 6mm D-Bore) |
4007-1006-1006 |
| 3504-0804-1808 |
3504 Series Lead Screw Clamping Collar (8mm Lead, 4 Start, 18mm OD, 8mm Length) |
3504-0804-2109 |
| 2910-1020-4008 |
2910 Series Aluminum Clamping Collar (8mm REX ID x 20mm OD, 10mm Length) |
2910-0920-4008 |
| 2301-0006-0020 |
2301 Series Brass, MOD 0.8, D-Bore, Set Screw Pinion Gear (6mm D-Bore, 20 Tooth) |
2303-1006-0020 |
| 2805-0004-0008 |
goRAIL Nut (1 Hole) - 4 Pack |
2805-0004-0108 |
| 2910-0816-0006 |
2910 Series Aluminum Clamping Collar (6mm ID x 16mm OD, 8mm Length) |
2910-0919-0006 |
| 1306-0016-1006 |
1306 Series HD Clamping Hub (6mm D-Bore) |
|
| 1601-0014-0006 |
1601 Series Flanged Ball Bearing (6mm ID x 14mm OD, 5mm Thickness) - 2 Pack |
1611-0514-0006 |
| 3306-1006-0008 |
3306 Series 8mm Pitch Set Screw Sprocket (6mm D-Bore, 8 Tooth) |
3307-1006-0010 |
| 1601-0014-0008 |
1601 Series Flanged Ball Bearing (8mm ID x 14mm OD, 4mm Thickness) - 2 Pack |
1611-0514-0008 |
| 2307-0006-0028 |
2307 Series Steel, MOD 1.5, Hub Mount Bevel Gear (6mm Bore, 28 Tooth) |
2307-0014-0028 |
| 2000-0025-0001 |
2000 Series Dual Mode Servo (25-1) |
2000-0025-0002 |
| 5200-0002-0026 |
5200 Series, 26:1 Ratio, 317 RPM Spur Gear Motor w/Encoder |
5202 Series Gear Motors |
| 5200-0002-0053 |
5200 Series, 53:1 Ratio, 153 RPM Spur Gear Motor w/Encoder |
5202 Series Gear Motors |
| 5200-0002-0107 |
5200 Series, 107:1 Ratio, 77 RPM Spur Gear Motor w/Encoder |
5202 Series Gear Motors |
| 5201-0002-0026 |
5201 Series, 26:1 Ratio, 210 RPM Spur Gear Motor w/Encoder |
5202 Series Gear Motors |
| 5201-0002-0053 |
5201 Series, 53:1 Ratio, 105 RPM Spur Gear Motor w/Encoder |
5202 Series Gear Motors |
| 5201-0002-0107 |
5201 Series, 107:1 Ratio, 52 RPM Spur Gear Motor w/Encoder |
5202 Series Gear Motors |
| 2301-0006-0030 |
2301 Series Brass, MOD 0.8, D-Bore, Set Screw Pinion Gear (6mm D-Bore, 30 Tooth) |
2303-1006-0030 |
| 1301-0016-1006 |
1301 Series Clamping Hub (6mm D-Bore) |
1309-0016-1006 |
| 2914-0001-0001 |
V-Groove Bearing Shield (1-1) - 2 Pack |
2914-0002-0001 |
| 3200-0001-1819 |
Master FTC Kit (2018-2019 Season) |
3200-0001-1920 |
| 3801-0709-0500 |
Encoder Cable, 500mm Length (4-Pos JST PH [MH-FC] to 4-Pos JST XH [MH-FC]) |
3801-0709-0600 |
| 1301-0016-0006 |
1301 Series Clamping Hub (6mm Bore) |
1309-0016-0006 |
| 2310-2000-0001 |
Replacement Servo Gear Set (2000-1) |