5000 Series 12VDC Motor with 8mm REX™ Pinion Shaft
SKU:
This is the motor that drives the popular Yellow Jacket Planetary Gear Motors, but with a Round hEX twist! Where you would normally find a pinion gear, we’ve installed an 8mm REX™ pinion shaft.
8mm REX™ is the signature positive-drive profile that’s compatible with a wide range of goBILDA® components—from hubs, to gears, to sprockets, pulleys, and more—across our build system ecosystem.
And what’s a “pinion shaft?” Well, we didn’t want to cause confusion between the factory motor shaft, which measures 0.125”, and the shaft that fits onto it, hence the unique name. The 8mm REX™ output shaft protrudes 33.5mm from the plastic mounting plate fastened to the motor, so you have plenty of real estate to attach a gear, pulley or hub to, while still leaving room for an 8mm REX™ bearing to add the necessary support.
This motor has a tested speed of 5800RPM. Make sure to put on your safety glasses, and let it rip!
Downloads
Specs
| Weight | 261g |
|---|---|
| Motor Type | Brushed DC |
| Nominal Voltage | 12VDC |
| No-Load Speed @ 12VDC (Theoretical) | 6000 RPM |
| No-Load Speed @ 12VDC (Tested) | 5800 RPM |
| No-Load Current @12VDC | 0.25A |
| Stall Current @12VDC | 9.2A |
| Stall Torque @12VDC | 1.47 kg.cm (20.45 oz-in) |
| Wire Length | 470mm (including connectors) |
| Motor Connector Type | 3.5mm FH-MC Bullet Connectors |
| Encoder Connector Type | 4-Pos JST XH [FH-MC] |
| Encoder Type | Relative, Quadrature |
| Encoder Sensor Type | Magnetic (Hall Effect) |
| Encoder Voltage Range | 3.3 - 5VDC |
| Encoder Cycles Per Revolution (Encoder Shaft) |
7 (Rises of Ch A) |
| Encoder Cycles Per Revolution (Output Shaft) |
7 (Rises of Ch A) |
| Encoder Countable Events Per Revolution (Encoder Shaft) |
28 (Rises & Falls of Ch A & B) |
| Encoder Countable Events Per Revolution (Output Shaft) |
28 (Rises & Falls of Ch A & B) |
Related Products:
These products have been hand curated by our R&D team. We have selected products that are directly compatible with or very relevant to the 5000-0002-4008.
![3801-0613-0100 - 2-Pos JST VH [MH-FC] to 3.5mm Bullet [MH-FC] Adaptor (100mm Length)](https://cdn11.bigcommerce.com/s-x56mtydx1w/images/stencil/318x318/products/823/4564/3801-0613-0100__22657__34074.1701992234.jpg?c=1 "3801-0613-0100 - 2-Pos JST VH [MH-FC] to 3.5mm Bullet [MH-FC] Adaptor (100mm Length)")
![3801-0709-0300 - 4-Pos JST PH [MH-FC] to 4-Pos JST XH [MH-FC] Adaptor (300mm Length)](https://cdn11.bigcommerce.com/s-x56mtydx1w/images/stencil/318x318/products/825/4571/3801-0709-0300__07240__59254.1701992236.jpg?c=1 "3801-0709-0300 - 4-Pos JST PH [MH-FC] to 4-Pos JST XH [MH-FC] Adaptor (300mm Length)")
![Encoder Breakout Cable (4-Pos JST XH [MH-FC] to 4 x 1-Pos TJC8 [MH-FC], 300mm Length)](https://cdn11.bigcommerce.com/s-x56mtydx1w/images/stencil/318x318/products/1211/6048/3801-0919-0300__22115__11537.1701992731.jpg?c=1 "Encoder Breakout Cable (4-Pos JST XH [MH-FC] to 4 x 1-Pos TJC8 [MH-FC], 300mm Length)")
![3801-0920-0300 -Encoder Breakout Cable (4-Pos JST XH [MH-FC] to 4 x 1-Pos TJC8 [FH-MC], 300mm Length)](https://cdn11.bigcommerce.com/s-x56mtydx1w/images/stencil/318x318/products/1239/6175/wire__53581__09292.1701992772.jpg?c=1 "3801-0920-0300 -Encoder Breakout Cable (4-Pos JST XH [MH-FC] to 4 x 1-Pos TJC8 [FH-MC], 300mm Length)")